I do not have dial tone

I do not have dial tone

Check the front of the gizmo and confirm the voice, phone or voip light is lit. If the voice light is not lit, refer to the "I've followed the instructions but my Voice/VoIP light is not lit." instructions
  • Check to make sure your telephone is plugged into the gizmo's Phone 1 port. Note: The Phone 2 port is not available at this time.
  • If you are using a new cordless phone, make sure it is fully charged.

    • Related Articles

    • I just lost dial tone

      If your service is working properly and you suddenly lose dial tone, this is generally due to intermitent maintenance that is done by your Internet service provider. Sometimes, based on the extent of the maintenance, your modem will not recognize the ...

    • Why do I sometimes lose dial-tone or the voice light?

      This generally happens when your broadband modem does not recognize the TeleBlend device. Restarting the modem and then the TeleBlend device should fix it. There are also instances where your modem has a built-in router, or your router dynamically ...

    • Will TeleBlend work over a dial-up connection

      No, TeleBlend Service uses broadband or high-speed Internet connections only - not dial-up connections. The higher connection speeds and greater bandwidth supported by broadband are required to allow both your computer and your phone to work ...

    • Setting up your TeleBlend Gizmo in a DMZ

      You can setup your TeleBlend Gizmo in the DMZ (demilitarized zone) of your router if you continue to have problems where you lose dial tone and have to restart the TeleBlend unit to restore it or where you have one-way or two-way audio problems on ...

    • Inside home wiring

      Some of our members have asked how the TeleBlend service can be used throughout their home in multiple rooms. We recommend using an expandable cordless phone system and placing the extensions throughout your house. However, some members opt to use ...